Hardwood Floor Refinishing in Acworth, GA

I'm Cristobal, and I sand and refinish hardwood floors in Acworth and the towns around Lake Allatoona. When you call 404-796-7650, you talk to me, and I'm the one who shows up with the sander. No sales rep, no hand-off to a crew you've never met.

The floors I see most in Acworth

Most Acworth homes I work in were built between the late 1980s and the late 2000s. In neighborhoods like Brookstone, Bentwater and the subdivisions off Cobb Parkway and Highway 92, that usually means site-finished red oak, 2-1/4 inch strip, laid in the foyer, dining room and family room. After 20 or 30 years, those floors tend to show the same things: gray traffic lanes from the garage door to the kitchen, dog scratches through the finish, and an orange tint from the original oil-based poly.

Closer to downtown and Main Street, there are older houses with narrower boards, some heart pine, and floors that have already been sanded once or twice. Those need a lighter touch. Before I quote a full sand on an older floor, I check how much wood is left above the tongue so I don't sand through it.

Georgia humidity and lake-area homes

Acworth sits between Lake Acworth and Lake Allatoona, and summers here are humid. Wood takes on moisture in July and August and gives it back when the heat runs in winter. That's why you see gaps between boards in January that close up again by June. It's normal, and it's not a reason to fill every gap with putty.

What I do pay attention to is the moisture reading before I sand and finish. If a crawlspace is damp or a floor has cupped near a back door, I'll tell you before I start, because finishing over a wet floor is how you end up with peeling poly a year later.

What a refinish includes

A full refinish in Acworth usually goes like this:

  1. I move through the rooms and check for loose boards, pet stains and old repairs.
  2. I sand the floor down to bare wood with a drum sander, then an edger along the walls, then I hand-scrape the corners.
  3. If you want a new color, I put down stain samples on your actual floor so you see them in your own light.
  4. I apply stain (or leave it natural), then two or three coats of finish, sanding lightly between coats.

Red oak takes stain evenly, so it handles everything from Natural to Jacobean. If you're trying to get away from the orange look, a water-based finish over a natural or light gray stain keeps the wood looking clean instead of amber.

If your floors only have surface scratches and the finish isn't worn through to wood, a screen and recoat may be enough. I'll tell you honestly which one your floor needs.

Stairs, repairs and board replacement

A lot of Acworth homes have oak treads on the stairs with carpet on the risers, or the other way around. I refinish treads, replace damaged boards, and weave new red oak into existing floors when a wall comes out or a carpeted room gets converted to hardwood, so the new boards blend in after the sand and stain.

Areas near Acworth I cover

Besides Acworth itself, I regularly work in Kennesaw, Dallas, Emerson, Cartersville and Canton. You can read more on my Canton, Cartersville and East Cobb pages, or see the full process on my hardwood floor refinishing page.

Call or text Cristobal at 404-796-7650 with a few photos of your floors, and I'll get back to you with a price and the next open date.

Common questions

How long does refinishing take in an Acworth home?

Most main floors take three to four days from sanding to the last coat. Water-based finishes dry faster, so you can usually walk on them in socks the next day.

Do I need to move out while you work?

Usually not. You'll need to stay off the rooms I'm working in, and I'll plan the order so you keep access to the kitchen or bedrooms when possible.

How much does it cost?

It depends on the square footage, the stain, any repairs and whether there are stairs. Text me a few photos of your floors and the rough size of the rooms, and I'll give you an exact price.

Can you match my floor to a new section?

Yes. Red oak is common in Acworth, so I can usually find matching boards, weave them in, and sand and stain the whole area together.

More: Hardwood floor refinishing · All service areas

Text me your project

Fill this in and it opens a text to Cristobal with your details. Photos of the floor help me give you a price faster.

On a computer? Just call or text 404-796-7650.

Call 404-796-7650Text