Hardwood Floor Refinishing in Buckhead
I'm Cristobal, and I refinish hardwood floors all over Buckhead, from the 1920s houses in Peachtree Heights and Garden Hills to the brick ranches near Chastain Park and the high-rise condos along Peachtree Road. When you call 404-796-7650, you talk to me, and I'm the one who shows up with the sander.
The floors I see in Buckhead
Most older Buckhead homes have 2 1/4 inch red oak or white oak strip flooring nailed over a wood subfloor. Some of the oldest houses in Peachtree Heights and Haynes Manor still have heart pine, which is softer and needs a lighter touch with the drum sander. Larger homes in Tuxedo Park and along West Paces Ferry often have wide plank oak, herringbone in the foyer, or a border around the dining room. Those details take more time by hand, but they are worth saving.
In the newer townhomes and condos, a lot of floors are engineered hardwood. Many of them can be sanded once or twice, depending on how thick the top wear layer is. I check that before I promise anything. If the wear layer is too thin, I'll tell you, and a screen and recoat may be the better choice.
How I refinish a Buckhead floor
- I move what you need moved, cover vents and doorways, and run my sander with a vacuum attached to keep dust down.
- I sand to bare wood in three passes, then edge and hand-scrape the corners and along the baseboards.
- I fill gaps and nail holes, and replace damaged boards with matching oak or pine when needed.
- I put stain samples right on your floor so you see the real color in your own light. Popular picks in Buckhead right now are natural, Special Walnut and soft grays.
- I finish with three coats of polyurethane, water-based or oil-based, with a light buff between coats.
For condos, I follow your building's work hours and elevator rules, and I plan the job around the HOA's noise window.
Georgia humidity and Buckhead floors
Buckhead summers are humid, and a lot of older homes here sit over crawlspaces. That moisture can make boards cup, then leave gaps in winter when the heat runs. Before I sand, I check the moisture level in the wood. If the boards are still cupped, I'll tell you to fix the crawlspace or run the AC for a while first, because sanding a wet floor flat just makes it crown later. Keeping the house between about 35 and 55 percent humidity all year keeps the finish looking good longer.
Cost
Every job is different. The price depends on the square footage, the stain, any board repairs, and how many stairs there are. Text me photos of your floors and the square footage at 404-796-7650 and I'll give you an exact price.
Nearby areas I also cover
I work in the neighborhoods around Buckhead every week, including Sandy Springs, Brookhaven and Dunwoody.
Common questions
Can you refinish heart pine floors in an old Buckhead house?
Yes. Heart pine is softer than oak, so I use finer grits and lighter pressure. It takes stain unevenly, so I usually recommend a natural finish that shows off the pine's amber color.
Do I have to move out during the work?
Not always. If I'm doing one floor of the house, you can usually stay on the other floor. With oil-based finish, plan to be away for a night or two because of the smell. Water-based finish has much less odor.
Can you refinish floors in a high-rise condo?
Yes. I follow the building's rules on hours, elevators and floor protection. Send me the HOA rules and I'll plan around them.
How soon can you start?
Most jobs can start within a few days. Text me photos and your address and I'll tell you my next open date.