Hardwood Floor Refinishing in Canton, GA

I'm Cristobal, and I refinish and install hardwood floors in Canton and the rest of Cherokee County. I drive up I-575 a lot, and some of my favorite jobs are up here: older homes near downtown and the Etowah River, and the big family houses in BridgeMill, Great Sky, Laurel Canyon and out along Sixes Road and Hickory Flat. I do the sanding, the repairs and the finish myself, so the person you talk to on the phone is the person working on your floor. Call or text me at 404-796-7650 with a few photos and I'll tell you what your floors need.

The floors I see in Canton

Georgia humidity and your floors

Canton gets the same hot, wet summers as the rest of north Georgia, and homes near the lakes and creeks hold even more moisture. Wood swells in summer and shrinks when the heat runs in winter, so gaps that open in January usually close by June. Before I sand, I check moisture in the boards and the crawl space. If a floor is cupping, I want to fix the cause first, not just sand it flat and watch it come back.

What a refinish looks like

  1. I look at the floors, test the finish and check for loose or damaged boards.
  2. I replace or weave in new boards where pets, water or old repairs left damage.
  3. I sand to bare wood with a big drum sander, then an edger along the walls, and I run a vacuum system to keep the dust under control.
  4. I apply stain if you want a new color. I always do sample patches on your floor first, because red oak takes color differently than heart pine.
  5. I put down two or three coats of water-based or oil-based polyurethane, depending on how you live and how fast you need the rooms back.

Most Canton homes take three to five days from first sanding to last coat. You can usually walk on the floor in socks the day after the final coat and bring furniture back after a few days. More on the process is on my hardwood floor refinishing page.

Installation and stairs

I also install new solid and engineered hardwood, plus LVP and laminate for basements and rentals. Stairs are a big one in Canton: many two-story homes have carpeted stairs with oak treads under them, or builder-grade treads that don't match the floors. I can refinish them to match or replace the treads and risers.

Areas I cover around Canton

Downtown Canton, BridgeMill, Great Sky, Laurel Canyon, Hickory Flat, Sixes, Holly Springs and Ball Ground. I also work in nearby Woodstock, Kennesaw and Cumming.

Call or text Cristobal at 404-796-7650. Send me a few photos of your floors and I'll get back to you the same day.

Common questions

Do you come all the way up to Canton?

Yes. Canton and the rest of Cherokee County are a regular part of my week.

Can you refinish floors that have been under carpet for years?

Usually yes. Pull up a corner in a closet and text me a photo. If it's oak or heart pine with enough thickness, I can almost always bring it back.

Can I stay in the house during the work?

Many people do. I close off the rooms I'm working on, but you will need to stay off the floors while the finish dries, so plan around the kitchen if it's included.

How much will it cost?

It depends on the square footage, the stain, any board repairs and how many stairs there are. Text me photos and the square footage and I'll give you an exact price.

Should I refinish or replace?

If the boards are solid and thick enough, refinishing is almost always the better choice. I'll tell you honestly which one makes sense.

More: Hardwood floor refinishing · All service areas

Text me your project

Fill this in and it opens a text to Cristobal with your details. Photos of the floor help me give you a price faster.

On a computer? Just call or text 404-796-7650.

Call 404-796-7650Text