Hardwood Floor Refinishing in Cartersville, GA
I'm Cristobal, and I refinish and install hardwood floors in Cartersville and around Bartow County. Cartersville has a little of everything: historic homes a few blocks from Main Street, brick ranches from the 1950s and 60s, lake houses toward Red Top Mountain and Lake Allatoona, and newer subdivisions off Highway 20, Cass-White Road and Joe Frank Harris Parkway. I sand, repair and finish every floor myself, start to finish. Call or text me at 404-796-7650 with a few photos and I'll tell you what your floors need.
The floors I see in Cartersville
- Heart pine and wide boards in the older homes. Many of the houses on the streets around downtown and the old neighborhoods near the courthouse have original heart pine. It is dense and full of resin, beautiful when finished natural, but stain can blotch on it, so I test before I recommend a color.
- Oak strip in the brick ranches. The ranch homes built in the 50s, 60s and 70s almost always have 2ΒΌ" red oak, often hidden under carpet. These floors usually have plenty of wood left and come back looking new.
- Red oak and engineered floors in newer subdivisions. Homes built in the last 25 years often have site-finished red oak in the main rooms or engineered hardwood. I check the wear layer on engineered floors before I sand.
Lake air, crawl spaces and Georgia humidity
Between Lake Allatoona, the Etowah River and our long humid summers, a lot of Cartersville homes deal with moisture. Crawl spaces under older houses can stay damp, and that shows up as cupped boards or gaps that open and close with the seasons. Before I sand, I check moisture levels in the wood. If the boards are cupped, I find out why first, because sanding a wet floor flat only makes it crown later.
How I refinish a floor
- I check the floors, test the old finish and mark any loose, stained or damaged boards.
- I repair or replace boards, including pet stains and water damage near doors and sinks.
- I sand to bare wood with a drum sander and edger, using a vacuum system to keep the dust down.
- If you want a new color, I do stain samples right on your floor so you see the real result.
- I apply two or three coats of polyurethane, water-based for a lighter, quicker job or oil-based for a warmer tone.
Most jobs take three to five days. You can walk on the floors in socks the day after the final coat. You can read more about the full process on my hardwood floor refinishing page.
Installation, LVP and stairs
I install solid and engineered hardwood, and LVP or laminate in basements, rentals and lake houses where water is a worry. I also refinish and replace stair treads, which is a common job in two-story homes where the stairs were carpeted from the start.
Areas I cover around Cartersville
Downtown Cartersville, Emerson, Cass, White, Euharlee, Adairsville, Taylorsville and the homes around Lake Allatoona and Red Top Mountain. I also work in nearby Kennesaw, Marietta and Woodstock.
Call or text Cristobal at 404-796-7650. Send a few photos and I'll tell you what your floors need.
Common questions
Do you work in Cartersville and Adairsville?
Yes. Bartow County is part of my regular area, from Emerson up to Adairsville.
Can old heart pine floors be refinished?
Usually yes. Heart pine takes more sandpaper and more care, but it is some of the best wood you can have. I check the thickness first and tell you honestly what is possible.
What finish do you recommend for a lake house?
For homes that see wet feet and dogs, I like a durable water-based finish in a satin sheen. It hides scratches and doesn't yellow.
How much does refinishing cost?
It depends on the square footage, the stain, the repairs and how many stairs there are. Text me photos and the square footage and I'll give you an exact price.
How long do I need to stay off the floor?
Socks the next day, furniture after a few days, and rugs after about two weeks while the finish cures.