Hardwood Floor Refinishing in Covington, GA
I'm Cristobal, and I refinish and install hardwood floors in Covington and across Newton County. Covington has some of the best old floors east of Atlanta. The Victorian and Greek Revival homes along Floyd Street, Clark Street and the streets off the historic square still have original heart pine, and the mill village in Porterdale has floors that have lasted more than a century. Farther out, the subdivisions off Highway 278, Salem Road and toward Oxford and Social Circle have newer oak and engineered floors. I do all the sanding, repairs and finishing myself. Call or text me at 404-796-7650 with a few photos and I'll tell you what your floors need.
The floors I see in Covington
- Heart pine in historic homes. Wide, dense boards with deep orange and red color. Many have been painted, patched or sanded more than once. I check thickness carefully and keep as much of the original wood as possible. Most of these look best with a natural finish that lets the grain show.
- Mill house floors in Porterdale. Narrow pine and oak boards, often uneven from years of settling. I fill, patch and sand them to keep the character without leaving them rough.
- Red oak in newer homes. Subdivisions from the last 20 to 30 years usually have site-finished 2ΒΌ" red oak or engineered hardwood. The finish wears through in front of the kitchen sink and the main walkways long before the wood is gone.
Old houses and Georgia humidity
Many older Covington homes sit on crawl spaces, and our humid summers can push moisture up into the boards. That's when you see cupping, squeaks and gaps that open in winter. Before I sand, I check moisture in the floor and look under the house if I can. If there is a moisture problem, I'll point it out so you can fix it before the new finish goes down.
How I refinish a floor
- I inspect the floor, test the old finish and mark any boards that need repair.
- I replace damaged boards, weaving in matching wood. For heart pine, I look for reclaimed boards so the repair blends in.
- I sand to bare wood with a drum sander and edger, with a vacuum system to keep dust under control.
- If you want stain, I do test patches on your own floor first.
- I finish with two or three coats of water-based or oil-based polyurethane.
Most jobs take three to five days. Socks the next day, furniture after a few days. More details are on my hardwood floor refinishing page.
Installation and stairs
I install solid and engineered hardwood, and LVP or laminate in basements and rentals. Older Covington homes often have stairs with heart pine treads under paint or carpet, and I can strip, sand and refinish them or replace treads that are too worn.
Areas I cover around Covington
The historic district, Porterdale, Oxford, Mansfield, Social Circle, Newborn and the subdivisions along Highway 278 and Salem Road. I also work in Snellville, Stone Mountain and McDonough.
Call or text Cristobal at 404-796-7650. Send me photos of your floors and I'll get back to you the same day.
Common questions
Can you refinish painted heart pine floors?
Often yes. Paint takes more work to remove, and I check the boards first, but many painted floors come back beautifully.
Will refinishing remove the character of an old floor?
No. I sand enough to get a clean, sound surface, but nail holes, saw marks and the natural color stay. That's what makes old floors special.
Do you match new boards to old ones?
Yes. For oak I use matching species and width. For heart pine I use reclaimed wood whenever I can find it.
How much does it cost?
It depends on the square footage, the stain, the repairs and the stairs. Text me photos and the square footage and I'll give you an exact price.
Do you work in Porterdale and Social Circle?
Yes, both are part of my regular area east of Atlanta.