Hardwood Floor Refinishing in Vinings

I'm Cristobal, and I refinish hardwood floors in Vinings and the rest of Cobb County. Whether you live in an older ranch off Paces Mill, a newer townhome near Vinings Jubilee, or a condo by the Chattahoochee, you deal with me from the first text to the last coat. Call or text 404-796-7650.

The floors I see in Vinings

Vinings has a mix of homes from different decades, and the floors show it. Houses from the 1960s and 70s usually have 2 1/4 inch red oak strip under old carpet, often in great shape once it's sanded. Many of the homes and townhomes built in the 1990s and 2000s have site-finished oak with a honey or gunstock stain that people now want to change to natural or a modern brown.

The newer townhome communities and condos often have engineered hardwood. Some engineered floors have a thick enough top layer to sand, and some do not. I measure before I quote, and if sanding is not safe, I'll tell you and suggest a screen and recoat instead.

How I refinish a Vinings floor

  1. I protect walls, vents and doorways and run my sander with a vacuum attached to keep dust down.
  2. I sand to bare wood in three passes, then edge and hand-scrape the corners, stair noses and under cabinet toe kicks.
  3. I fill gaps, set loose nails and replace damaged boards with matching wood.
  4. I put stain samples right on your floor so you see the real color in your own light. In Vinings, I do a lot of natural, Provincial and Special Walnut.
  5. I finish with three coats of polyurethane, water-based or oil-based, buffing between coats for a smooth feel.

Stairs are common in Vinings townhomes. I refinish treads and handrails too, and I can stain the treads to match the new floor color.

Georgia humidity and floors near the river

Vinings sits close to the Chattahoochee, and many homes here are on slopes with basements or crawlspaces. Humid summers can push moisture into the boards, causing cupping, and dry winter heat can open gaps. Before I sand, I check the wood with a moisture meter. If the floor is still cupped, it needs to dry before sanding or it will crown later. A dehumidifier in the crawlspace and keeping the AC running in summer protects your new finish.

Cost

Every floor is different. The price depends on the square footage, the stain color, repairs, and the number of stairs. Text me photos and the square footage at 404-796-7650 and I'll send you an exact price.

Nearby areas I also cover

I work across Cobb and the west side of Atlanta, including Smyrna, Marietta and Mableton.

Common questions

Can you change my honey oak floors to a darker or more natural color?

Yes. Once I sand to bare wood, the old color is gone. I put samples on the floor so you can compare a few options before I stain.

Can you refinish townhome stairs?

Yes. I sand and finish the treads by hand and can paint the risers white for a clean look.

How long will my floors be out of use?

Most Vinings jobs take 3 to 5 days, depending on the size and the finish. You can walk on them in socks about a day after the last coat of water-based finish.

Do you work in condos with HOA rules?

Yes. I follow the building's work hours and floor protection rules.

More: Hardwood floor refinishing · All service areas

Text me your project

Fill this in and it opens a text to Cristobal with your details. Photos of the floor help me give you a price faster.

On a computer? Just call or text 404-796-7650.

Call 404-796-7650Text